Slurry Pump Impeller Volute Throatbush Fpl Insert Chrome Alloy Da05 Rubber Dr55 Slurry Pump Parts

Basic Info.

Working Pressure	High Pressure Pump
Influent Type of Impeller	Single Suction Pump
Position of Pump Shaft	Horizontal Pump
Pump Casing Combined	Horizontal Split Pumps
Mounting Height	Suction Centrifugal
Impeller	Closed
Usage	Pump, Pumps, Ash Pumps
Drive Type	E-Motor or Diesel Engine
Colour	Blue, Yellow, Green
Seal	Gland Packing; Expeller; Mechanial
Material	Ultra Chrome Alloy
Transport Package	Wooden Packaging Box
Specification	6 inch discharge
Trademark	DSP
Origin	Shijiazhuang, China
HS Code	8413709990
Production Capacity	1800 Sets/Year

Product Description

Introduction: DeShi pumps(DSP)' strength lies in the advanced hydraulic design and the high standard of casting technology,high performance of wear life, which helps clients reduce the cost and easy operation.DSP slurry pump parts are designed for ultra heavy duty applications such as mill discharge, process plantand tailings, as well as other specialty applications. The wearing parts include impeller, volute liner, throat bush, FPL insert, shaft sleeve, seals, etc. These partsare very easily worn-out because they work under longtime impact of abrasive and corrosive slurries in thehigh speed. So clients will be strongly suggested to prepare enough wearing parts in stock in case of emergentrepair or maintenance, making sure the continuous steady running.
The wet parts material:M: metal (wear-resistant ultra chrome alloy)R: rubber (DR26; DR33; DR55; DR08; S31;S42 ...)
Polyurethane Parts can be interchangeable with rubber ones.
Slurry Pump Main parts:
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require noinserts or nuts. High efficiency and high head designs are also available.• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease ofmaintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomerseal rings back all liner joints.• Throat Bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allowpositive accurate alignment during assembly and simple removal.• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to longbearing life. Only four through bolts are required to hold the cartridge type housing in the frame.

Slurry Pump Impeller Volute Throatbush Fpl Insert Chrome Alloy Da05 Rubber Dr55 Slurry Pump Parts

Welcome to contact us any time for details.Your inquiry will get our prompt attention and response !

Products

Slurry Pump Impeller Volute Throatbush Fpl Insert Chrome Alloy Da05 Rubber Dr55 Slurry Pump Parts

Basic Info.

Product Description